DC 5V 5Meter (16.4Feet) Non-Waterproof SK6812 Individually Addressable LED Strip Light 5050 RGB 60LED/Meter LED Pixel Flexible Tape White PCB
- Color:
- RGB Magic Color
- PCB Background:
- White
* Fan and economical Arduino project.Works great with Arduino UNO ,K-1000C controller
* Each leds is individual addressable. 256 brightness display and 32-bit color display.one IC controls one led Each pixel can have its own color and brightness. You can control them individually and set them to any color or animation you want.
* Chainable design. It comes with 3-pin JST-SM connectors on both ends. You can continue to extend or cut at both ends.
* Making led screen, led wall, advertising board, apply to hotel, KTV, bars, Outdoor advertising signs, Festivel Christmas or wedding party decoration.It has adhesive glue on the back, so you can stick it to the wall or other items conveniently as you like. It is covered with clear silicone coating.
LED Type | IC Type | Voltage | PCB Width | Cut Section | PCB Background | Protection Grade | Wattage | Unit Length | LED Density | Pixel Points |
---|---|---|---|---|---|---|---|---|---|---|
SMD5050 | SK6812 | 5V DC | 10MM | 1LED/Section | White | Non-Waterproof | 18W/M | 5m (16.4ft) | 60LED/M | 60Points/M |
SK6812 IC Chip-built-in 5050 Digital Addressable RGBW Pixel LED Strip, 60LED/m High Density DC5V, 5Meters per roll.
Lighting source:SMD 5050 RGB chip
Lamp power:18W/M(Max)
Inout voltage: DC 5V
Emitting color:Red,Green and Blue Changeable.
Waterproof grade:Non-waterproofIP20
PCB color:White
Beam angle:120 degrees
Working temperature:-20℃60℃
Storage temperature:30℃-80℃
Package information:1 roll up in a reel then put into one PC bag,finally put into the paper box.
IC driver:SK6812
Pixel Pitch (mm):60Points per meter
Dimension:5M(L)*10MM(W)*2MM(H)
Grey Grade: 256
Product Features
1. Control IC SK6812 inserted in 5050 RGB LED diode, supporting numerous color-change effects .2. 12mm White PCB0,25mm thickness with 3M tape back side,permanent bonding and thermal conductive.
3. 60LEDs/M . 5V low voltage inputted , don’t over 6V , otherwise you will destroy the entire strip .
4. It is only Date Pin for signal transfer , no Clock Pin .
5.Controller System:SK6812.
6. Flexible PCB material . Each LED/Pixel can be cut , there is cut lines every 6.9mm,FPC is made up of 2Oz, 3Oz or 4Oz thick double-layer oxygen-free copper flexible PCB, excellent for electrical conductivity and heat-sink.
7.Easy installation:3M tape on the back makes it can be sticky on clean and dry surface:just tear off the 3M and stick smoothy on the installation surface.
8.Flexibility:It is very flexible and you can DIY any pictures and you need.
Accesories